The Rockshox Rear Shock Bearing Adapter Upgrade Kit replaces the standard DU bushing mount with bearing hardware. Designed to fit frames that use 8mm ID x 30mm wide hardware, and compatible with Vivid C1 (2024+) and Super Deluxe Coil B1+ (2023+) rear shocks.

– Sold as a set (per eyelet)
– Reduces friction to provide smooth, low-maintenance ride performance
– We recommend using the Rear Shock Bearing Adapter Socket Tool (00.4318.089.000) for installation and removal.

– May not suit all brands of shock or frame, as this bearing hardware is larger than standard bushing hardware. Check clearance before installation.

-May fit other brands of shock that use a standard 1/2″ eyelet – check clearance first.
– Red DU bushing must be removed prior to installation. For instructions, refer to the relevant service manual.
– SRAM Model ID: RS-UPK-BADP-A1

– Rockshox Bearing Dust Covers 00.4118.159.024 can be used to convert this hardware to 8 x 40mm (ie; to suit Rocky Mountain bikes)

Find the required Installation Tool here: Rockshox Rear Shock Bearing Hardware Tool

What size mounting hardware do I need?

8mm x 30mm hardwaresuits a 8mm diameter bolt, with an overallmount width of 30mm.

Check with your frame manufacturer for what size of mounting hardware your bike uses.

Each bike needs to use the exact size of mounting hardware for correct fitment.

Using the wrong size of mounting hardwarewill damage your bike.

Are you not sureif this will suit your bike? Contact us.