Rush RC Damper Body Clamp (25mm Bore)

A dedicated single-bore clamp for the RockShox Rush RC damper body. This 25mm profile matches the round body of the Rush RC damper exactly and is required for safe servicing.

If your fork uses a 24mm socket (instead of a cassette tool) to open the top of the damper, you most likely have a Rush RC. This clamp is for that specific damper only.

Not sure if you have a Rush RC?
Rush RC dampers look identical to Charger RC externally, but they require a 24mm socket to open instead of a cassette tool. Please check your forks top cap before ordering, or refer to the SRAM 2023 Service Manual (starts at page 164). Clamping Warning:
Never clamp directly on a round damper body using metal vise jaws or generic clamps. This part has an exact 25.00 mm bore that distributes pressure evenly and avoids damage.

See this page for more details: How to Use a Big Diameter Shaft Clamp

What It Does

• Allows safe clamping of the Rush RC damper body in a bench vise
• Prevents slipping or damage while removing the damper top cap
• Supports basic damper service and full teardown if needed

Compatibility

• Only fits: Rush RC damper body (25.00 mm outer diameter)
• Common on 2023+ RockShox ZEB, Lyrik, and Pike forks (base models)
• Not compatible with Charger RC, R, or other RockShox dampers

Need Full Rebuild Tools?

• Rush RC Damper-Only Rebuild Toolkit
• Rush RC + Airshaft Rebuild Kit

Disclaimer: For home use only. Clamp with care, and always clean surfaces before using the tool. Use at your own risk. See our Terms of Service.