The All-New Rockshox Pike Select Charger RC Debonair+ C1 Fork is for the new school of trail riders. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. With a redesigned 35mm chassis offering less weight but retaining critical stiffness, they feature longer upper and lower bushings with better overlap to increase stiffness and reduce friction, new bolt-in adapters to switch between torque cap enabled hubs or standard hubs, bolt-on fender compatibility and Maxima Plush Dynamic suspension fluids to maximise performance, the new Pike Select, with Charger RC Damper and Debonair+,is here to level up your trail game.

The new DebonAir+ design addresses the two conflicting traits that most riders want and results in them working in harmony together, better than ever. With a larger negative air volume, small bump compliance and plushness are balanced with increased support and a more consistent ride height to deliver a fork that is buttery smooth, ultra-supportive and maintains ride height when things get steep.

Who’s this item for:For the new breed of trail riders. Riders who ride the whole mountain. Riders that want lightweight, but without compromising on strength, stiffness and feel.

Spring type:The Pike Select is an air-sprung fork featuring Rockshox’s new Debonair+ air spring with buttercups.

Wheel size compatibility:Forks are available to suit 29″ and 27.5″ wheel sizes.

Fork offset:The Pike Select is available in 37mm and 44mm offset for 27.5″ and 44mm for 29″.

Axle to crown height:

• 27.5″
  • 120mm – 512mm
  • 130mm – 522mm
  • 140mm – 532mm
• 29″
  • 120mm – 531mm
  • 130mm – 541mm
  • 140mm – 551mm

Max tyre width:3 inches.

Suspension travel amount:The Pike Select is available in 120mm, 130mm and 140mm travel options.

Damper technology: The Charger RC gives riders control over rebound and compression that can be adjusted from fully open to firm. Fewer dials make it easier to find a great setup with less doubt about what all those clickers actually do.

Travel adjustability:Travel changes can be made through the removal and replacement of Debonair+ air spring assemblies. If you buy a 120mm travel now, you can change it to a 140mm travel down the track.

Volume adjustability:Air-volume reducing ‘Bottomless Tokens’.

Stanchion diameter:The Pike Select is built around 35mm tapered wall aluminium stanchions.

Axle size and style:15mm Maxle Stealth Thru-axle, Boost spacing and compatible with both Torque Cap and standard hub end caps with a removable bolt-in adapter.

Steerer tube standard:Tapered 1 1/8″ to 1 1/2″ aluminium steerer.

Lowers materials:Magnesium Aluminium Alloy.Upgradeable to new Pressure Relief Valves. Eliminate unwanted air pressure build-up in the lower leg caused by variations in altitude or temperature. With the press of a button, Pressure Relief Valves restore premium fork feel. Pressure relief kit sold seperately.

CSU / Steerer tube materials:Forged aluminium crown and aluminium steerer tube.

Brake mount style:Post Mount 180mm

Brake rotor compatibility (minimum / maximum):180mm minimum and 220mm maximum.

Pros:The Pike is a trail rider’s dream. Buttery smooth small bump compliance, with support for bigger hits.

Cons:If you want more adjustability, you may want to look at the Charger 3-equipped forks.