The REVIVE 272 was developed with a special focus on gravel and XC use in mind, and it is the first BikeYoke dropper for the 27.2mm Seatpost standard.

With travel of 80mm and an overall length of 400mm, it is ready for a long extension on shorter seat tubes, but it is also designed to be trimmed down to 300mm should you need a shorter post or if you only want to save some weight. Trimmed down to 300mm the post is weighing in at less than 340g.

The REVIVE 272 also features the patented REVIVE hydraulic system with bleeding function, which with its celebrated and uniquely smooth function and reliability has already helped the REVIVE win various dropper comparison tests in international magazines and media.

As with all BikeYoke droppers, great importance is attached to serviceability, because every moving part on a bicycle – even more so a suspension component – needs regular care – and care should be as easy as possible. All wearing parts are available for end customers. A “small service/lower leg” can be carried out in less than 10 minutes and requires neither extraordinary skills nor tools. Not even a shock pump is needed.

All BikeYoke droppers have always been designed and made for the enthusiast biker – the REVIVE 272 is no exception.

Remote Compatibility:

REVIVE 272 is compatible with any cable-actuated remote which allows for cable clamping at the remote end (wire nipple at post end).

Minimum required cable pull = 6mm

Dimensional Specs:

Seatpost/Seat tube diameter: 27.2mm

Length overall (effective, middle saddle rails): 400mm

Drop: 80mm (infinitely adjustable)

Included:

1 set REVIVE dropper post includes:

1x REVIVE 272 Seatpost (diameter 27.2mm)

1x cable housing 1600mm

1x inner wire 1800mm

2x housing endcap

1 set of cable connector parts

1x cable connector tool

1x air valve adapter

1x Quick-Reset-Lever

1x remote (optional)

1x BikeYoke I-spec adapter or Splits Clamp (optional)

1 set of titanium saddle bolts and nuts (optional)