There’s no way around it – this carriermust be used with Miche splined track cogs.

To install, place a Miche splined cog onto the carrier, grease the threads and use a chainwhip as you would with any other cog, then install your lockring. Once the carrier is securely installed on your hub, you’ll only need a lockring tool to swap cogs.

These can be used on any threaded track hub, not just Miche.

FYI: All track hubs have 1.37″x24tpi cog threading. This can be used on any threaded track hub.

specs

heat-treated, nickel-plated steel

standard 1.37″x24tpi English threading